[Jul. 2016-NEW]Free 210-065 New PDF Dumps & 210-065 New VCE Dumps Offered by Braindump2go[NQ11-NQ20]

2016 July Cisco Official – 210-065:Implementing Cisco Video Network Devices (CIVND) Exam Questions New Updated Today in Braindump2go.com for Free Instant Download!

100% Exam Pass Guaranteed!

NEW QUESTION 11 – NEW QUESTION 20:

1.|2016 Latest Cisco 210-065 PDF Dumps & 210-065 VCE Dumps 192Q&As Instant Download: http://www.braindump2go.com/210-065.html

[100% Exam Pass Promised!]

2.|2016 New Cisco 210-065 Exam Questions PDF – Google Drive:https://drive.google.com/folderview?id=0B272WrTALRHcRWU0dTZQQUpjMVU&usp=sharing

 

QUESTION 11
What is the optimum distance for a person sitting using the Cisco TelePresence System 500?

A.    the camera can adjust automatically
B.    0.5 meters and 0.75 meters (1.5 and 2.5 feet)
C.    1.2 meters and 1.8 meters (4 and 6 feet)
D.    3.0 and 5.0 meters (10 and 15 feet)

Answer: C

QUESTION 12
You have installed a C-Series endpoint in an office where DHCP is not supported.
At a minimum, which four network items must be configured for the endpoint to be able to register with H.323 on a Cisco TelePresence Video Communication Server located at the external headquarters location? (Choose four.)

A.    unique IPv4 address
B.    subnet mask
C.    default gateway
D.    Cisco VCS IPv4 address
E.    Active Directory IPv4 address
F.    SMTP server IPv4 address

Answer: ABCD

QUESTION 13
Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communication Server for H.323 to function correctly? (Choose two.)

A.    unique system ID
B.    unique H.323 ID
C.    unique DNS entry ID
D.    unique E.164 alias
E.    unique real-time transport protocol port numbers
F.    unique NTP server IPv4 address

Answer: BD

QUESTION 14
Which two additional items must be configured for an endpoint to register manually with the Cisco TelePresence Video Communication Server for the SIP to function correctly? (Choose two.)

A.    E.164 alias
B.    H.323 ID
C.    SIP uniform resource indicator
D.    configured SIP registrar and proxy server
E.    NTP server IPv4 address
F.    unique system ID

Answer: CD

QUESTION 15
What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints?

A.    Option 150 is not important.
B.    It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file
while booting.
C.    It is the IPv4 address of the default gateway for the subnet that the video endpoint is
connected to.
D.    It is the configured SIP registrar and poxy server.
E.    It is the unique NTP server IPv4 address.

Answer: B

QUESTION 16
Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System Codec C40 endpoint that is registered to a VCS?

A.    Allow iX application media
B.    Send send-receive SDP in mid-call invite
C.    Allow presentation sharing using BFCP
D.    Allow presentation sharing using H.235
E.    Deliver conference bridge identifier

Answer: C

QUESTION 17
What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch?

A.    The Cisco TelePresence Multipoint Control Unit is a hardware bridge.
The Cisco TelePresence Multipoint Switch is a software bridge.
B.    The Cisco TelePresence Multipoint Control Unit is a software bridge for immersive and non-immersive endpoints.
The Cisco TelePresence Multipoint Switch is a hardware bridge for non-immersive endpoints.
C.    The Cisco TelePresence Multipoint Control Unit delivers automatic voice-activated switching.
The Cisco TelePresence Multipoint Switch provides active presence.
D.    The Cisco TelePresence Multipoint Control Unit has a latency of less than 10 ms, whereas the Cisco TelePresence Multipoint Switch has a latency of 100 ms.

Answer: A

QUESTION 18
Which two of these are required in order to complete the password recovery of a Cisco TelePresence System endpoint? (Choose two.)

A.    must have FTP enabled on the endpoint
B.    must have SSH enabled on the endpoint
C.    must have the security question answer for the endpoint
D.    must be in the same room as the main display
E.    must have SFTP enabled on the endpoint
F.    must call Cisco TAC for the security code

Answer: BD

QUESTION 19
In this item, you will need to use all information presented to you to successfully answer the question.
Refer to the exhibits. An administrator needs to perform a factory reset on a C-Series endpoint.
What are two valid ways to accomplish this task? (Choose two.)
 
 
 
 
 

A.    Exhibit A
B.    Exhibit B
C.    Exhibit C
D.    Exhibit D
E.    Exhibit E

Answer: CD

QUESTION 20
Which standard will support call forwarding?

A.    H.450.3
B.    H.323
C.    RFC 2833
D.    H.450.2

Answer: A


!!!! Recommend!!!!

Braindump2go 2016 Jul. New Updated 210-065 Exam PDF and VCE 192Q Dumps:

http://www.braindump2go.com/210-065.html

[100% Exam Pass Guaranteed!]

 

210-065 Exam Google Drive:

1.Cisco 210-065 Exam VCE and PDF Dumps Download: https://drive.google.com/folderview?id=0B272WrTALRHcdkRINUNIR1h2Ums&usp=sharing
2.New 210-065 Exam Dumps and 210-065 Exam Questions 192Q&As: https://drive.google.com/folderview?id=0B272WrTALRHcVlhYdTdDeUdWQVE&usp=sharing